Stump Grinding Teeth
These are Greenteeth pockets, and the series is set by your machine rather than by preference: under 20 hp runs 500 Series, 20 to 45 hp runs 700 Series, 40 to 85 hp runs 900 Series, and anything above that runs 1100 Series. The series are not interchangeable, so match what is on the wheel now. The 500, 700 and 900 pockets are LoPro, a slimmer design that leaves about 3/4 inch of clearance between the pocket and the stump so the pocket itself wears more slowly. Every pocket comes threaded or counterbored and the two mate as a pair, one on each side of the wheel, so order them in matching sets. Bolts are sold separately because the length depends on your wheel, and each listing names the bolt it takes. If you are not sure which series you are running, send a photo of the wheel or call 866-629-6062. Achieve efficient stump removal with our innovative stump grinding teeth, made in America. We offer premium pockets, hardware, and replacement teeth for the most popular stump cutters. If you also run a forestry mulcher, see our forestry mulcher teeth range for the drum side of the job.
